manualshive.com logo in svg

GIGA-BYTE TECHNOLOGY R282-Z9G, User Manual

Share
Download
GIGA-BYTE TECHNOLOGY R282-Z9G User Manual Download Page 110

BIOS Setup

- 104 -

5-6  Server Management Menu

Parameter

Description

FRB-2 Timer

FRB-2 timer (POST timer).

FRB-2 Timer 
timeout

Configure the FRB2 Timer timeout.

Options available: 3 minutes/4 minutes/5 minutes/6 minutes. Default setting is 

6 

minutes

.

(NOTE) This item is configurable when FRB-2 Timer is set to Enabled.

FRB-2 Timer Policy

Configure the FRB2 Timer policy.

Options available: Do Nothing/Reset/Power Down. Default setting is 

Do Nothing

.

(NOTE ) This item is configurable when FRB-2 Timer is set to Enabled.

OS Watchdog Timer

Enable/Disable OS Watchdog Timer function.
Options available: Enabled/Disabled. Default setting is 

Disabled

.

OS Wtd Timer 
Timeout

Configure OS Watchdog Timer.

Options available: 5 minutes/10 minutes/15 minutes/20 minutes. Default setting is 

10 

minutes

.

(NOTE) This item is configurable when OS Watchdog Timer is set to Enabled.

OS Wtd Timer 
Policy

Configure OS Watchdog Timer Policy.

Options available: Reset/Do Nothing/Power Down. Default setting is 

Reset

.

(NOTE) This item is configurable when OS Watchdog Timer is set to Enabled.

Wait BMC Ready

Configure time to wait BMC ready.

Options available: Disabled/2 minutes/4 minutes/6 minutes. Default setting is 

2 

minutes

.

System Event Log

Press [Enter] to configure advanced items.

Summary of Contents for R282-Z9G





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands