manualshive.com logo in svg

GIGA-BYTE TECHNOLOGY R282-P91, User Manual, Page: 19 / 99

Share
Download
GIGA-BYTE TECHNOLOGY R282-P91 User Manual Download Page 19

- 19 -

System Hardware Installation

Pre-installation Instructions

Computer components and electronic circuit boards can be damaged by discharges of static 
electricity. Working on computers that are still connected to a power supply can be extremely 
dangerous. Follow the simple guidelines below to avoid damage to your computer or injury to 
yourself.

• Always disconnect the computer from the power outlet whenever you are working inside the 

computer case.

• If possible, wear a grounded wrist strap when you are working inside the computer case. 

Alternatively, discharge any static electricity by touching the bare metal system of the computer 
case, or the bare metal body of any other grounded appliance.

• Hold electronic circuit boards by the edges only. Do not touch the components on the board 

unless it is necessary to do so. Do not flex or stress the circuit board. 

• Leave all components inside the static-proof packaging until you are ready to use the component 

for the installation.

Chapter 3  System Hardware Installation

Summary of Contents for R282-P91




































































































Reviews:

No comments