GIGA-BYTE TECHNOLOGY MZ72-HB2 User Manual Download Page 50

Page: 50 / 124

- 50 -

BIOS Setup

2-2-10

Network Stack Configuration

(Note) This item appears when

Network Stack

is set to

Enabled

Parameter

Description

Network Stack

Enable/Disable the UEFI network stack.
Options available: Enabled, Disabled. Default setting is

Enabled

Ipv4 PXE Support

(Note)

Enable/Disable the Ipv4 PXE feature.
Options available: Enabled, Disabled. Default setting is

Enabled

Ipv4 HTTP Support

(Note)

Enable/Disable the Ipv4 HTTP feature.
Options available: Enabled, Disabled. Default setting is

Disabled

Ipv6 PXE Support

(Note)

Enable/Disable the Ipv6 PXE feature.
Options available: Enabled, Disabled. Default setting is

Enabled

Ipv6 HTTP Support

(Note)

Enable/Disable the Ipv6 HTTP feature.
Options available: Enabled, Disabled. Default setting is

Disabled

PXE boot wait time

(Note)

Wait time in seconds to press ESC key to abort the PXE boot.
Press the <+> / <-> keys to increase or decrease the desired values.

Media detect count

(Note)

Number of times the presence of media will be checked.
Press the <+> / <-> keys to increase or decrease the desired values.

Summary of Contents for MZ72-HB2





























































































































Search results

Summary of Contents for MZ72-HB2

Reviews:

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY MZ72-HB2, User Manual

Search results

Summary of Contents for MZ72-HB2

Reviews:

Brands by name

Popular brands