&
IPv6 PXE Support
Enables or disables IPv6 PXE Support. This item is configurable only when
Network Stack
is enabled.
&
IPv6 HTTP Support
Enables or disables HTTP boot support for IPv6. This item is configurable only when
Network Stack
is
enabled.
&
PXE boot wait time
Allows you to configure how long to wait before you can press <Esc> to abort the PXE boot. This item is
configurable only when
Network Stack
is enabled. (Default: 0)
&
Media detect count
Allows you to set the number of times to check the presence of media. This item is configurable only when
Network Stack
is enabled. (Default: 1)
NVMe Configuration
Displays information on your M.2 NVME PCIe SSD if installed.
SATA And RST Configuration
&
SATA Controller(s)
Enables or disables the integrated SATA controllers. (Default: Enabled)
&
SATA Mode Selection
Specifies the operating mode of the integrated SATA controllers.
AHCI
Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface specification that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug. (Default)
&
Aggressive LPM Support
Enables or disables the power saving feature, ALPM (Aggressive Link Power Management), for the Chipset
SATA controllers. (Default: Disabled)
&
Port 0/1/2/3
Enables or disables each SATA port. (Default: Enabled)
&
SATA Port 0/1/2/3 DevSlp
Allows you to determine whether to let the connected SATA device go into sleep mode. (Default: Disabled)
&
Hot plug
Enables or disable the hot plug capability for each SATA port. (Default: Disabled)
&
Configured as eSATA
Enables or disables support for external SATA devices.
Intel(R) Ethernet Controller
This sub-menu provides information on LAN configuration and related configuration options.
Miscellaneous
&
Intel Platform Trust Technology (PTT)
Enables or disables Intel
®
PTT Technology. (Default: Disabled)
&
3DMark01 Enhancement
Allows you to determine whether to enhance some legacy benchmark performance. (Default: Disabled)
&
CPU PCIe Link Speed
Allows you to set the operation mode of the CPU-controlled PCI Express slots to Gen 1, Gen 2, Gen 3, or
Gen 4
(Note)
. Actual operation mode is subject to the hardware specification of each slot.
Auto
lets the BIOS
automatically configure this setting. (Default: Auto)
(Note) This item is present only when you install a CPU that supports this feature.
- 33 -
