background image

 

d

Turbo Per Core Limit Control

 (Note 1)

 

Allows you to control each CPU core limit separately. (Default: Auto)

 

&

Extreme Memory Profile (X.M.P.) 

(Note 2)

 

Allows the BIOS to read the SPD data on XMP memory module(s) to enhance memory performance when 

enabled.

 

Disabled   

 

Disables this function. (Default)

 

Profile1   

 

Uses Profile 1 settings.

 

Profile2 

(Note 2)

   

Uses Profile 2 settings.

 

&

System Memory Multiplier

 

Allows you to set the system memory multiplier. 

Auto

 sets memory multiplier according to memory SPD 

data. (Default: Auto)

 

&

Memory Ref Clock

 

Allows you to manually adjust the memory reference clock. (Default: Auto)

 

&

Memory Odd Ratio (100/133 or 200/266)

 (Note 2)

 

Enabled

 allows Qclk to run in odd frequency. (Default: Auto)

 

&

Gear Mode

 (Note 2)

 

Allows you to improve the maximum OC frequency potential. (Default: Auto)

 

ƒ

Advanced Memory Settings

 

&

Memory Multiplier Tweaker

 

Provides different levels of memory auto-tuning. (Default: Auto)

 

&

Channel Interleaving

 

Enables or disables memory channel interleaving. 

Enabled

 allows the system to simultaneously access 

different channels of the memory to increase memory performance and stability. 

Auto

 lets the BIOS 

automatically configure this setting. (Default: Auto)

 

&

Rank Interleaving

 

Enables or disables memory rank interleaving. 

Enabled

 allows the system to simultaneously access different 

ranks of the memory to increase memory performance and stability. 

Auto

 lets the BIOS automatically 

configure this setting. (Default: Auto)

 

&

Memory Boot Mode

 

Provides memory detection and training methods.

 

Auto   

 

 

Lets the BIOS automatically configure this setting. (Default)

 

Normal 

 

 

 The BIOS automatically performs memory training. Please note that if the system 

becomes unstable or unbootable, try to clear the CMOS values and reset the board 

to default values. (Refer to the introductions of the battery/clear CMOS jumper in 

Chapter 1 for how to clear the CMOS values.)

 

Enable Fast Boot   Skip memory detection and training in some specific criteria for faster memory 

boot.

 

Disable Fast Boot  Detect and train memory at every single boot.

 

&

Realtime Memory Timing

 

Allows you to fine-tune memory timings after the BIOS stage. (Default: Auto)

(Note 1)  This item is present only when you install a CPU that supports this feature. For more information about 

Intel

®

 CPUs' unique features, please visit Intel's website.

(Note 2)  This item is present only when you install a CPU and a memory module that support this feature.

- 27 -

Summary of Contents for H510M DS2V










































Reviews: