manualshive.com logo in svg

GIGA-BYTE TECHNOLOGY H310M S2P 2.0, User Manual, Page: 33 / 44

Share
Download
GIGA-BYTE TECHNOLOGY H310M S2P 2.0 User Manual Download Page 33

 

&

PXE boot wait time

 

Allows you to configure how long to wait before you can press <Esc> to abort the PXE boot. This item is 

configurable only when 

Network Stack

 is enabled. (Default: 0)

 

&

Media detect count

 

Allows you to set the number of times to check the presence of media. This item is configurable only when 

Network Stack

 is enabled. (Default: 1)

 

`

NVMe Configuration

 

Displays information on your M.2 NVME PCIe SSD if installed.

 

`

SATA And RST Configuration

 

&

SATA Controller(s) 

 

Enables or disables the integrated SATA controllers. (Default: Enabled)

 

&

SATA Mode Selection 

 

Allows you to decide whether to configure the SATA controller integrated in the Chipset to AHCI mode.

 

AHCI   

 

 Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface 

(AHCI) is an interface specification that allows the storage driver to enable advanced 

Serial ATA features such as Native Command Queuing and hot plug. (Default)

 

&

Aggressive LPM Support

 

Enables or disables the power saving feature, ALPM (Aggressive Link Power Management), for the Chipset 

SATA controllers. (Default: Enabled)

 

&

Port 0/1/2/3

 

Enables or disables each SATA port. (Default: Enabled)

 

&

Hot plug

 

Enables or disable the hot plug capability for each SATA port. (Default: Disabled)

 

&

Configured as eSATA

 

Enables or disables support for external SATA devices.

 

&

Mechanical Presence Switch

 

Allows you to determine whether to turn on the Mechanical Presence switch for the SATA device. This item 

is configurable only when 

Hot plug

 is enabled.(Default: Enabled)

- 33 -

Summary of Contents for H310M S2P 2.0













































Reviews:

No comments