GIGA-BYTE TECHNOLOGY GA-Z270-HD3 User Manual Download Page 6

Page: 6 / 44

1-2 Product Specifications

CPU

Support for 7th and 6th generation Intel

Core

™

i7 processors/

Intel

Core

™

i5 processors/Intel

Core

™

i3 processors/

Intel

Pentium

processors/Intel

Celeron

processors in the LGA1151 package

(Go to GIGABYTE's website for the latest CPU support list.)

L3 cache varies with CPU

Chipset

Intel

Z270 Express Chipset

Memory

4 x DDR4 DIMM sockets supporting up to 64 GB of system memory

* Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical

memory is installed, the actual memory size displayed will be less than the size of

the physical memory installed.

Dual channel memory architecture

Support for DDR4 2400/2133 MHz memory modules

Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in

non-ECC mode)

Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules

Support for Extreme Memory Profile (XMP) memory modules

(Go to GIGABYTE's website for the latest supported memory speeds and memory modules.)

Onboard

Graphics

Integrated Graphics Processor-Intel

HD Graphics support:

- 1 x D-Sub port, supporting a maximum resolution of 1920x1200@60 Hz

- 1 x DVI-D port, supporting a maximum resolution of 1920x1200@60 Hz

* The DVI-D port does not support D-Sub connection by adapter.

- 1 x HDMI port, supporting a maximum resolution of 4096x2160@24 Hz

* Support for HDMI 1.4 version.

Support for up to 3 displays at the same time

Maximum shared memory of 1 GB

Audio

Realtek

ALC887 codec

High Definition Audio

2/4/5.1/7.1-channel

Support for S/PDIF Out

LAN

Intel

GbE LAN chip (10/100/1000 Mbit)

Expansion Slots

1 x PCI Express x16 slot, running at x16 (PCIEX16)

* For optimum performance, if only one PCI Express graphics card is to be installed,

be sure to install it in the PCIEX16 slot.

2 x PCI Express x16 slots, running at x4 (PCIEX4_1, PCIEX4_2)

2 x PCI Express x1 slots

(All of the PCI Express slots conform to PCI Express 3.0 standard.)

1 x PCI slot

Multi-Graphics

Technology

Support for AMD Quad-GPU CrossFireX

™

and 2-Way AMD CrossFire

™

technologies

(PCIEX16, PCIEX4_1)

Storage Interface

Chipset:

- 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280/22110 SATA and

PCIe x4/x2 SSD support)

- 1 x SATA Express connector

- 6 -

Summary of Contents for GA-Z270-HD3













































Search results

Summary of Contents for GA-Z270-HD3

Reviews:

Related manuals for GA-Z270-HD3

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY GA-Z270-HD3, User Manual

Search results

Summary of Contents for GA-Z270-HD3

Reviews:

Related manuals for GA-Z270-HD3

Brands by name

Popular brands