background image

HDMI Port

The HDMI port is HDCP compliant and supports Dolby TrueHD and DTS HD 

Master Audio formats. It also supports up to 192 KHz/16bit 8-channel LPCM 

audio output. You can use this port to connect your HDMI-supported monitor. The maximum supported 

resolution is 4096x2160@24 Hz, but the actual resolutions supported are dependent on the monitor 

being used.

USB 3.1 Gen 1 Port

The USB 3.1 Gen 1 port supports the USB 3.1 Gen 1 specification and is compatible to the USB 2.0 

specification. Use this port for USB devices.

RJ-45 LAN Port

The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following 

describes the states of the LAN port LEDs.

 

To set up a triple-display configuration, you must install motherboard drivers in the operating 

system first.

 

After installing the HDMI device, make sure to set the default sound playback device to HDMI. 

(The item name may differ depending on your operating system.)

Center/Subwoofer Speaker Out (Orange)

Use this audio jack to connect center/subwoofer speakers in a 5.1/7.1-channel audio configuration.

Rear Speaker Out (Black)

This jack can be used to connect rear speakers in a 4/5.1/7.1-channel audio configuration.

Side Speaker Out (Gray)

Use this audio jack to connect side speakers in a 7.1-channel audio configuration.

Line In (Blue)

The line in jack. Use this audio jack for line in devices such as an optical drive, walkman, etc.

Line Out (Green)

The line out jack. Use this audio jack for a headphone or 2-channel speaker. This jack can be used to 

connect front speakers in a 4/5.1/7.1-channel audio configuration.

Mic In (Pink)

The Mic in jack.

 

When removing the cable connected to a back panel connector, first remove the cable from your 

device and then remove it from the motherboard.

 

When removing the cable, pull it straight out from the connector. Do not rock it side to side to 

prevent an electrical short inside the cable connector.

Please visit GIGABYTE's website for more software information.

Activity LED

Connection/

Speed LED

LAN Port

State 

Description

Orange

1 Gbps data rate

Green

100 Mbps data rate

Off

10 Mbps data rate

State 

Description

Blinking

Data transmission or receiving is occurring

On

No data transmission or receiving is occurring

- 11 -

Summary of Contents for GA-Z270-HD3













































Reviews: