GIGA-BYTE TECHNOLOGY GA-SBCAP3940 User Manual Download Page 23

Page: 23 / 36

- 23 -

2-3 Advanced

OnBoard LAN Controller (LAN1)

Enables or disables the onboard LAN function. (Default: Enabled)

If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to

Disabled

OnBoard LAN Controller#2 (LAN2)

Enables or disables the onboard LAN function. (Default: Enabled)

If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to

Disabled

Soft-Off by PWR-BTTN

Configures the way to turn off the computer in MS-DOS mode using the power button.

Instant-Off

Press the power button and then the system will be turned off instantly. (Default)

Delay 4 Sec. Press and hold the power button for 4 seconds to turn off the system. If the power

button is pressed for less than 4 seconds, the system will enter suspend mode.

Primary Display

Specifies the first initiation of the monitor display from the installed PCIe graphics card or the onboard

graphics.

IGD

Sets the onboard graphics as the first display. (Default)

PCIe

Sets the graphics card on the PCIe slot as the first display.

PCIE VGA Workaround

Allows you to increase the compatibility of the PCIe graphics card. (Default: Disabled)

ErP

Determines whether to let the system consume least power in S5 (shutdown) state. (Default: Disabled)

Note: When this item is set to

Enabled

, the following functions will become unavailable: Resume by Alarm,

power on by mouse, and power on by keyboard.

LVDS Support

Enables or disables the LVDS function. (Default: Enabled)

Main

OnBoard LAN Controller

[Enabled]

OnBoard LAN Controller#2

[Enabled]

Soft-Off by PWR-BTTN

[Instant-off]

Primary

Display

[IGD]

PCIE VGA Workaround

[Disabled]

ErP

[Disabled]

LVDS

Support [Enabled]

LVDS Panel Resolution

[1366x768 6-bit]

Trusted Computing

IT8686 Super IO Configuration

Hardware Monitor

IT8768SEC Super IO Configuration

SIO Misc Functions

CPU Configuration

PCI Subsystem Settings

Network Stack Configuration

CSM Configuration

USB Configuration

: Select Screen

: Select Item

Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit

Advanced

Boot

Save & Exit

Security

Summary of Contents for GA-SBCAP3940





































Search results

Summary of Contents for GA-SBCAP3940

Reviews:

Related manuals for GA-SBCAP3940

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY GA-SBCAP3940, User Manual

Search results

Summary of Contents for GA-SBCAP3940

Reviews:

Related manuals for GA-SBCAP3940

Brands by name

Popular brands