manualshive.com logo in svg

GIGA-BYTE TECHNOLOGY GA-H97M-D3H, User Manual, Page: 30 / 40

Share
Download
GIGA-BYTE TECHNOLOGY GA-H97M-D3H User Manual Download Page 30

- 30 -

 

`

Super IO Coniguration

 

This section provides information on the super I/O chip and allows you to conigure the serial port and 

parallel port.

 

&

Serial Port A

 

Enables or disables the onboard serial port. (Default: Enabled)

 

&

Parallel Port

 

Enables or disables the onboard parallel port. (Default: Enabled)

 

`

Device Mode

 

This item is conigurable only when 

Parallel Port

 is set to 

Enabled

. Selects an operating mode for the 

onboard parallel (LPT) port. Options are: Standard Parallel Port Mode (Default), EPP Mode (Enhanced 

Parallel Port), ECP Mode (Extended Capabilities Port), EPP Mode & ECP Mode.

 

`

Intel(R) Smart Connect Technology

 

&

ISCT Support

 

Enables or disables Intel

®

 Smart Connect Technology. (Default: Disabled)

 

`

Realtek PCIe GBE Family Controller

 

This sub-menu provides information on LAN coniguration.

2-6 

Power Management

 

&

Power Loading

 

Enables or disables dummy load. When the power supply is at low load, a self-protection will activate causing 
it to shutdown or fail. If this occurs, please set to 

Enabled

. 

Auto

 lets the BIOS automatically conigure this 

setting. (Default: Auto)

 

&

Resume by Alarm

 

Determines whether to power on the system at a desired time. (Default: Disabled)

 

If enabled, set the date and time as following:

 

Wake up day: Turn on the system at a speciic time on each day or on a speciic day in a month.

 

Wake up hour/minute/second: Set the time at which the system will be powered on automatically.

 

Note: When using this function, avoid inadequate shutdown from the operating system or removal of the 
AC power, or the settings may not be effective.

Summary of Contents for GA-H97M-D3H









































Reviews:

No comments