- 20 -
`
Advanced Memory Settings
&
Extreme Memory Proile (X.M.P.)
(Note)
, System Memory Multiplier, Memory Frequency(MHz)
The settings above are synchronous to those under the same items on the
Advanced Frequency Settings
menu.
&
Memory Timing Mode
Manual
and
Advanced Manual
allows the
Channel Interleaving
,
Rank Interleaving
, and memory timing
settings below to be conigurable. Options are: Auto (default), Manual, Advanced Manual.
&
Proile DDR Voltage
When using a non-XMP memory module or Extreme Memory Proile (X.M.P.) is set to Disabled, the value is
displayed according to your memory speciication. When Extreme Memory Proile (X.M.P.) is set to Proile1
or Proile2, the value is displayed according to the SPD data on the XMP memory.
&
Channel Interleaving
Enables or disables memory channel interleaving.
Enabled
allows the system to simultaneously access
different channels of the memory to increase memory performance and stability. (Default: Auto)
&
Rank Interleaving
Enables or disables memory rank interleaving.
Enabled
allows the system to simultaneously access different
ranks of the memory to increase memory performance and stability. (Default: Auto)
`
Channel A/B Memory Sub Timings
This sub-menu provides memory timing settings for each channel of memory. This sub-menu provides memory
timing settings for each channel of memory. The respective timing setting screens are conigurable only when
Memory Timing Mode
is set to
Manual
or
Advanced Manual
. Note: Your system may become unstable or fail
to boot after you make changes on the memory timings. If this occurs, please reset the board to default values
by loading optimized defaults or clearing the CMOS values.
`
Advanced Voltage Settings
This sub-menu allows you to set CPU, chipset and memory voltages.
`
PC Health Status
&
Reset Case Open Status
Disabled
Keeps or clears the record of previous chassis intrusion status. (Default)
Enabled
Clears the record of previous chassis intrusion status and the
Case Open
ield will
show "No" at next boot.
&
Case Open
Displays the detection status of the chassis intrusion detection device attached to the motherboard CI
header. If the system chassis cover is removed, this ield will show "Yes", otherwise it will show "No". To
clear the chassis intrusion status record, set
Reset Case Open Status
to
Enabled
, save the settings to
the CMOS, and then restart your system.
&
CPU Vcore/DRAM V3.3V/+5V/+12V
Displays the current system voltages.
&
CPU/System Temperature
Displays current CPU/system temperature.
&
CPU/System Fan Speed
Displays current CPU/system fan speeds.
&
CPU Temperature Warning
Sets the warning threshold for CPU temperature. When temperature exceeds the threshold, BIOS will emit
warning sound. Options are: Disabled (default), 60
o
C/140
o
F, 70
o
C/158
o
F, 80
o
C/176
o
F, 90
o
C/194
o
F.
(Note) This item is present only when you install a CPU and a memory module that support this feature.
