GIGA-BYTE TECHNOLOGY GA-B150-HD3 User Manual Download Page 26

Page: 26 / 40

PC Health Status

Reset Case Open Status

Disabled

Keeps or clears the record of previous chassis intrusion status. (Default)

Enabled

Clears the record of previous chassis intrusion status and the

Case Open

field will

show "No" at next boot.

Case Open

Displays the detection status of the chassis intrusion detection device attached to the motherboard

header

. If the system chassis cover is removed, this field will show "Yes", otherwise it will show "No". To

clear the chassis intrusion status record, set

Reset Case Open Status

Enabled

, save the settings to

the CMOS, and then restart your system.

CPU Vcore/CPU VCCSA/DRAM Channel A/B V3.3V/+5V/+12V/CPU VAXG

Displays the current system voltages.

CPU/System Temperature

Displays current CPU/system temperature.

CPU/System Fan Speed

Displays current CPU/system fan speeds.

CPU/System Temperature Warning

Sets the warning threshold for CPU/system temperature. When temperature exceeds the threshold, BIOS

will emit warning sound. Options are: Disabled (default), 60

C/140

F, 70

C/158

F, 80

C/176

F, 90

C/194

CPU/System Fan Fail Warning

Allows the system to emit warning sound if the fan is not connected or fails. Check the fan condition or

fan connection when this occurs. (Default: Disabled)

CPU Fan Speed Control (CPU_FAN Connector)

Allows you to determine whether to enable the fan speed control function and adjust the fan speed.

Normal

Allows the fan to run at different speeds according to the CPU temperature. You

can adjust the fan speed with System Information Viewer based on your system

requirements. (Default)

Silent

Allows the fan to run at slow speeds.

Manual

Allows you to control the fan speed under the

Fan Speed Percentage

item.

Full Speed

Allows the fan to run at full speeds.

Fan Speed Percentage

Allows you to control the fan speed. This item is configurable only when

CPU Fan Speed Control

is set

Manual

. Options are: 0.75 PWM value /

C ~ 2.50 PWM value /

1st System Fan Speed Control (SYS_FAN1 Connector)

Allows you to determine whether to enable the fan speed control function and adjust the fan speed.

Normal

Allows the fan to run at different speeds according to the system temperature. You

can adjust the fan speed with System Information Viewer based on your system

requirements. (Default)

Silent

Allows the fan to run at slow speeds.

Manual

Allows you to control the fan speed under the

Fan Speed Percentage

item.

Full Speed

Allows the fan to run at full speeds.

Fan Speed Percentage

Allows you to control the fan speed. This item is configurable only when

1st System Fan Speed Control

is set to

Manual

. Options are: 0.75 PWM value /

C ~ 2.50 PWM value /

2nd System Fan Speed Control (SYS_FAN2 Connector)

Allows you to determine whether to enable the fan speed control function and adjust the fan speed.

Normal

Allows the fan to run at different speeds according to the system temperature. You

can adjust the fan speed with System Information Viewer based on your system

requirements. (Default)

- 26 -

Summary of Contents for GA-B150-HD3









































Search results

Summary of Contents for GA-B150-HD3

Reviews:

Related manuals for GA-B150-HD3

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY GA-B150-HD3, User Manual

Search results

Summary of Contents for GA-B150-HD3

Reviews:

Related manuals for GA-B150-HD3

Brands by name

Popular brands