- 57 -
BIOS Setup
5-2-6
Network Stack Configuration
Parameter
Description
Network Stack
Enable/Disable the UEFI network stack.
Options available: Enabled/Disabled. Default setting is
Enabled
.
IPv4 PXE Support
Enable/Disable the Ipv4 PXE feature.
Options available: Enabled/Disabled. Default setting is
Enabled
.
IPv4 HTTP Support
Enable/Disable the Ipv4 HTTP feature.
Options available: Enabled/Disabled. Default setting is
Disabled
.
IPv6 PXE Support
Enable/Disable the Ipv6 PXE feature.
Options available: Enabled/Disabled. Default setting is
Disabled
.
IPv6 HTTP Support
Enable/Disable the Ipv6 HTTP feature.
Options available: Enabled/Disabled. Default setting is
Disabled
.
PXE boot wait time
Wait time in seconds to press ESC key to abort the PXE boot. Use <+> /
<-> or numeric keys to set the value.
Media detect count
Press the <+> / <-> keys to increase or decrease the desired values.
Summary of Contents for E162-220
