GIGA-BYTE TECHNOLOGY B550M AORUS PRO User Manual Download Page 31

Page: 31 / 44

IPv6 HTTP Support

Enables or disables HTTP boot support for IPv6. This item is configurable only when

Network Stack

enabled.

PXE boot wait time

Allows you to configure how long to wait before you can press <Esc> to abort the PXE boot. This item is

configurable only when

Network Stack

is enabled. (Default: 0)

Media detect count

Allows you to set the number of times to check the presence of media. This item is configurable only when

Network Stack

is enabled. (Default: 1)

Realtek PCIe Family Controller

This sub-menu provides information on LAN configuration and related configuration options.

Miscellaneous

LEDs in System Power On State

Allows you to enable or disable motherboard LED lighting when the system is on.

Off

Disables the selected lighting mode when the system is on.

Enables the selected lighting mode when the system is on. (Default)

LEDs in Sleep, Hibernation, and Soft Off States

Allows you to set the lighting mode of the motherboard LEDs in system S3/S4/S5 state.

This item is configurable when

LEDs in System Power On State

is set to

Off

Disables the selected lighting mode when the system enters S3/S4/S5 state. (Default)

Enables the selected lighting mode when the system enters S3/S4/S5 state.

PCIe Slot Configuration

Allows you to set the operation mode of the PCI Express slots to Gen 1, Gen 2, Gen 3, or Gen 4

(Note)

. Actual

operation mode is subject to the hardware specification of each slot.

Auto

lets the BIOS automatically

configure this setting. (Default: Auto)

3DMark01 Enhancement

Allows you to determine whether to enhance some legacy benchmark performance. (Default: Disabled)

IOMMU

Enables or disables AMD IOMMU support. (Default: Auto)

AMD CPU fTPM

Enables or disables the TPM 2.0 function integrated in the AMD CPU. (Default: Disabled)

Trusted Computing

Enables or disables Trusted Platform Module (TPM).

AMD CBS

This sub-menu provides AMD CBS-related configuration options.

PC Health

Reset Case Open Status

Disabled

Keeps or clears the record of previous chassis intrusion status. (Default)

Enabled

Clears the record of previous chassis intrusion status and the

Case Open

field will

show "No" at next boot.

(Note)

This item is present only when you install a CPU that supports this feature.

- 31 -

Summary of Contents for B550M AORUS PRO













































Search results

Summary of Contents for B550M AORUS PRO

Reviews:

Related manuals for B550M AORUS PRO

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY B550M AORUS PRO, User Manual

Search results

Summary of Contents for B550M AORUS PRO

Reviews:

Related manuals for B550M AORUS PRO

Brands by name

Popular brands