GIGA-BYTE TECHNOLOGY B550 GAMING X V2 User Manual Download Page 6

Page: 6 / 44

1-2 Product Specifications

CPU

AMD Socket AM4, support for:

3rd Generation AMD Ryzen

™

processors/

3rd Generation AMD Ryzen

™

with Radeon

™

Graphics processors

(Go to GIGABYTE's website for the latest CPU support list.)

Chipset

AMD B550

Memory

4 x DDR4 DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity)

of system memory

Support for DDR4 3200/2933/2667/2400/2133 MHz memory modules

Dual channel memory architecture

Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules

Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules

Support for Extreme Memory Profile (XMP) memory modules

(Go to GIGABYTE's website for the latest supported memory speeds and memory

modules.)

Onboard

Graphics

Integrated in the 3rd Generation AMD Ryzen

™

with Radeon

™

Graphics processors:

- 1 x DVI-D port, supporting a maximum resolution of 1920x1200@60 Hz

* The DVI-D port does not support D-Sub connection by adapter.

- 1 x HDMI port, supporting a maximum resolution of 4096x2160@60 Hz

* Support for HDMI 2.1 version, HDCP 2.3, and HDR.

Maximum shared memory of 16 GB

Audio

Realtek

ALC887 codec

High Definition Audio

2/4/5.1/7.1-channel

* To configure 7.1-channel audio, you need to open the audio software and select Device

advanced settings > Playback Device to change the default setting first. Please visit

GIGABYTE's website for details on configuring the audio software.

LAN

Realtek

GbE LAN chip (1000 Mbit/100 Mbit)

Expansion Slots

1 x PCI Express x16 slot (PCIEX16), integrated in the CPU:

- 3rd Generation AMD Ryzen

™

processors support PCIe 4.0 x16 mode

- 3rd Generation AMD Ryzen

™

with Radeon

™

Graphics processors support

PCIe 3.0 x16 mode

* For optimum performance, if only one PCI Express graphics card is to be installed,

be sure to install it in the PCIEX16 slot.

1 x PCI Express x16 slot (PCIEX2), integrated in the Chipset:

- Supporting PCIe 3.0 x2 mode

3 x PCI Express x1 slots (PCIEX1_1, PCIEX1_2, PCIEX1_3), integrated in the Chipset:

- Supporting PCIe 3.0 x1 mode

Storage Interface

1 x M.2 connector (M2A_CPU), integrated in the CPU, supporting Socket 3,

M key, type 2242/2260/2280/22110 SSDs:

- 3rd Generation AMD Ryzen

™

processors support SATA and PCIe 4.0 x4/x2 SSDs

- 3rd Generation AMD Ryzen

™

with Radeon

™

Graphics processors support

SATA and PCIe 3.0 x4/x2 SSDs

1 x M.2 connector (M2B_SB), integrated in the Chipset, supporting Socket 3,

M key, type 2242/2260/2280/22110 SSDs:

- Supporting SATA and PCIe 3.0 x4/x2 SSDs

4 x SATA 6Gb/s connectors, integrated in the Chipset:

- Support for RAID 0, RAID 1, and RAID 10

- 6 -

Summary of Contents for B550 GAMING X V2













































Search results

Summary of Contents for B550 GAMING X V2

Reviews:

Related manuals for B550 GAMING X V2

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY B550 GAMING X V2, User Manual

Search results

Summary of Contents for B550 GAMING X V2

Reviews:

Related manuals for B550 GAMING X V2

Brands by name

Popular brands