TorchLED
Seite 9 / 18
Erstellt
01.05.2013
chal
Bearbeitet
26.06.2018
chal
Objekt-ID
852088
2.7 Standard program
We provide a broad range of products that covers every customer requirement. The latest documents can be
found on our website www.gifas.ch, or you can contact us by telephone.
We will gladly assist you!
2.8 Responsibilities of the operator
1. Ensure that this document is always in a legible form and stored with the device.
2. Read this instruction manual carefully and thoroughly before operating the device for the first time.
3. This product has been developed and manufactured exclusively for the application specified within
this document. Any application not explicitly stated in this document could damage the integrity of the
product and/or be a source of danger.
4. The manufacturer will reject any liability for damage caused by any improper use of the product.
5. The product must not be installed in potentially explosive environments. Flammable gasses or
smoke/fumes pose a significant safety risk.
6. Countries that are not part of the European Community must observe national legal regulations, as
well as any other valid standards and provisions, in order to guarantee a corresponding level of safety.
7. The installation of the TorchLED charging station must be carried out in accordance with the applicable
regulations.
8. The manufacturer will not accept any liability in the event of incorrect installation or any deformations
that may occur as a result.
9. The electric power supply must be switched off before any interventions on the TorchLED charging
station.
10. Only original parts from the manufacturer may be used for maintenance work. Only qualified personnel
may carry out maintenance work on the TorchLED torch light.
11. Any procedure that is not explicitly included in the instructions by the manufacturer is not permitted.
12. The packaging material (plastics, Styrofoam etc.) must not be kept within the reach of children; this is
a potential source of danger.
Hint
If the TorchLED torch light is used in harsh environments, degree of protection IP54 must be complied with in
order to avoid damage and malfunctions.
It should also be ensured that the TorchLED charging station is used in a place protected from humidity and
wetness.
