10.To exit Setup Mode, push the MCK back in. The new value you selected for the function will
remain as set until you change it again by selecting it individually in Setup Mode, or restore the
Factory Defaults in Setup Mode.
The following set of tables shows the various user-editable Functions available in Setup Mode, but
please note the following important points.
Note 1:
The function's “clickstream” shown in each chart abbreviates the MCK operations needed to
edit the function. To save space and text, the
§
symbol means “rotate the MCK fully counter-
clockwise then press the Display Matrix momentarily.” Example:
1 § 0 §
means “Enter the digit 1,
rotate the MCK fully counter-clockwise then press the Display Matrix momentarily, enter the digit 0,
rotate the MCK fully counter-clockwise then press the Display Matrix momentarily.”
After entering
the desired value for a function, remember to turn the MCK fully counter-clockwise and press
the Display Matrix momentarily.
Note 2:
Some functions are “on/off” types (value of 0 or 1), while some have a range of values. For
example, Function 7 has 10 options, from 0-9.
Note 3:
“Reset” functions have a safety feature where you must press a red “
Y
” on the display. This is
similar to when a PC asks “Are You Sure?”
Available Functions and Values
Function 1
Instant activated function: Controls startup behavior
Default = 0
Value
Result
Clickstream
0
Starts up with instant activated tuning
1 § 0 §
1
Starts up in Chameleon mode
1 § 1 §
2
Starts up with main menu (no instant activated tuning, no Chameleon mode)
1 § 2 §
Function 2
Instant activated tuning: Select startup tuning (if function 1 = 0)
Default = 0
Value
Result
Clickstream
0
Startup tuning is standard EADGBe
2 § 0 §
1
Startup tuning is the particular tuning selected with Function 14
2 § 1 §
2
Startup tuning is the last completed tuning
2 § 2 §
Note: With value = 2, if you tuned to E major for example and turned off Dark Fire, it will start up with E major tuning
Function 3
Piezo out status: Sets up Piezo signal status
Default = 1
Value
Result
Clickstream
0
Piezo signal never switches on automatically; must be switched manually (
|
LED)
3 § 0 §
1
Switches on Pizeo signal automatically whenever possible
3 § 1 §
Note: The Piezo is always switched off during tuning. With value = 1, it's turned on again after the tuning process is done
Gibson Dark Fire 4.0 manual, page 28