Giant P46HT, Operating Instructions/ Repair And Service Manual

Page: 7 / 12

7
P46W, P46W-HK & P46HT PARTS LIST
ITEM PART DESCRIPTION QTY.
1 07222 Crankcase 1
2 07181 Vent/Filler Plug with Seal 1
3 08004 Cover, Crankcase 1
4 08005 O-Ring 1
5 08008 Oil Dipstick 1
6 01009 O-Ring 1
9 07188 Cylinder Screw with Slot 4
10 07223-0100 Spring Washer 4
11 08012 Oil Drain Plug with Seal 1
11A 06709 Gasket, Oil Drain Plug 1
12 07224 Bearing Cover 2
14 08015 Radial Shaft Seal 2
15 08020 Ball Bearing 2
16 07225 Screw and Washer 6
17 07226 Shaft Protector 1
18 07227 Crankshaft 1
19 01024 Key 1
20 08024 Connecting Rod 3
22 07201 Crosshead Assy. 3
23 01031 Crosshead Pin 3
24A 07021 Plunger Pipe 3
24B 08456 Tension Screw 3
24C 07676 Copper Ring 3
25* 06648 Flinger 3
26 07206 Radial Shaft Seal 3
26A 11510 Spacer Sleeve 3
28 07207 Shim, Manifold Stud 2
29 07033 Manifold 1
29A 06176 Stud Bolt (P46HT only) 2
30 07230 Pressure Ring 3
ITEM PART DESCRIPTION QTY.
31 07241 V-Sleeve (P46W only) 3
31 11511 V-Sleeve, High Temp.
(P46W-HK, P46HT) 3
32 07231 Support Ring 3
33 07232 Pressure Spring 3
34 07325 Retainer, Spring 6
(P46W, P46W-HK)
34 05593 Retainer, Spring (P46HT) 6
35 06017-0100 Valve Spring 6
36 06016 Valve Plate 6
37 06014 Valve Seat 6
38 06015 O-Ring 6
39 07233 Suction Valve Adaptor 3
40 07234 O-Ring, Adapter 3
41 07235 Plug, Manifold (Inlet) 3
42 12004 O-Ring, for Item 41 3
43 07792 Plug, Manifold (Discharge) 3
44 07035 O-Ring for Item 43 3
45 07215 Stud, Manifold 2
46 08040 Hex Nut, Manifold Stud 2
47 08041 Spring Washer, Stud 2
48 07237 Housing, Rear V-Sleeve 1
49 07238 O-Ring, Rear V-Sleeve
Housing 1
50 07239 Rear V-Sleeve (P46W only) 3
50 11512 High Temperature Seal
(P46W-HK & P46HT) 6
51 07240 Support Ring, Rear V-Sleeve 3
52 07109 Plug, 1/2" BSP 1
53 13338 Plug, 3/8" BSP 1
* This will not fit into older P46W pumps with brass retainers (#08064). It can only be used with part number
11510 (#26A). You can substitute p/n 13333 for 06648 only if the brass retainer (#08064) is used.