19
18
EN
13
14
DERAILLEUR CABLE ROUTING INSTRUCTION
ROUTING REAR BRAKE CABLE
CAUTION:
Use the manufacturer’s technical manuals of electric shifting system in combi-
nation with below instruction for the electric shifting system installation.
Start out front and rear derailleur cables from the CONTACT SLR AERO HANDLEBAR of in-
ner route. (Refer to Installation section - CONTACT SLR AERO HANDLEBAR)
Start out rear brake cables from the CONTACT SLR AERO HANDLEBAR inner route. (Refer
to Installation section - CONTACT SLR AERO HANDLEBAR)
Thread the cable(s) into the cable hole at the front-left of toptube (refer to following fig:
toptube cable hole 1, 2), and pass the cable(s) through the downtube and thread out from the
bottom bracket.
Thread the rear brake cable into the cable hole
at the left of the toptube. (Refer to fig. Rear
brake cable hole front)
Pass the cable through and out from the cable
at the rear end of toptube.
Thread derailleur cables into the specific cable
hole at the bottom bracket (refer to following
fig: BB cable hole).
Pass the front derailleur cable through the
derailleur cable hole in following fig: Front
derailleur cable hole.
Pass the rear derailleur cable through the right
of chain stay and treat out from the rear derailleur
cable hole as following fig: Rear derailleur cable
hole.
1.
1.
2.
2.
3.
3.
4.
5.
fig: Toptube cable hole 1
Fig. BB cable hole
Fig. Front derailleur cable hole
Fig. Rear derailleur cable hole
Fig. Rear brake cable hole rear
Fig. Rear brake cable hole front
fig: Toptube cable hole 2
Giant aluminum
cable stopper
Shimano Di2
grommet
Rear derailleur
cable hole
Front derailleur
cable hole
Front derailleur
cable hole
Rear brake
cable hole
Rear brake cable hole
Rear derailleur
cable hole
Summary of Contents for Envie series
Page 1: ......
