Giant D263S, Operator'S Manual

Page: 10 / 84

10
2.Applications
ATTACHMENTS
Only original GIANT attachments and options
are allowed on the Wheel Loader:
•
Earth bucket
• High-tip bucket
• Pallet fork
• Manure fork
• Feed- and manure scraper
• Auger bucket
• Kerb stone clamp
• Brick clamp
• Silage cutter
• Mixing bucket
• Straw blower
• Bucket brush
• Hay Bale Fork
• Bale grabber
TOBROCO Machines is excluded from any
liability for damage and consequential
damage due to non-GIANT products.
CAUTION:
When using non-GIANT attachments it
is possible that specifications, such as
parallel system, tipping load and lifting
capacity are not being reached.
OPERATING THE MACHINE
1. Get on and off safely when entering or leaving the operator’s cab. Face the
machine. Always maintain a three point contact with the steps and handrails.
Do not use control levers as handles. Do not jump on or off the machine.
Never try to get on or off a moving machine.
2. Do not start engine or operate levers from anywhere other than the seat.
3. Before starting the engine, fasten the seat belt, make sure that the direction
lever is set in the neutral position, the parking brake switch is actuated and the
bucket is lowered to the ground.
4. Do not start engine by shorting across starter terminals.
5. Watch where you are going at all times. Watch for and avoid obstacles.
6. Never permit passengers on the machine. Keep bystanders away from the
machine during operation.