Parts included in this kit:
Bodytube 36” long (slotted booster section)
Bodytube 24” long (upper section)
Nosecone 3”
Slimline 75-54mm Tailcone retainer
18” long 38mm motor tube
3 fins .093 G-10 fiberglass
Rail guides: pack of two (3”)
2 3.0” to 38mm Centering rings
HARDPOINT ANCHOR
(w/ eyebolt, nut &washer)
4 quiklinks (1/8”)
Decal
1 5/8” nylon shockcord 15 feet
1 KEVLAR® FireBall small
1
!
”KEVLAR® two-ended shockloop 15’
2 KEVLAR® parachute pads (medium)
18” chute (single piece)
48” chute (single piece)
Assembly Instruction booklet
3” Avionics Bay
1 eyebolt 1/4X20, washer, nut
1 6” long GROOVE-LOK
Supplies needed by the builder to complete this kit:
6-min or 12 min. epoxy, 30 min or 45 min epoxy, J.B. Weld, mixing cups and mixing stick, masking
tape, rubber band, tape measure, pencil, #100 sandpaper, paper towels, Drill with 1/8” and 1⁄4” bits,
Latex gloves, rubbing alcohol, Vasiline (or other petroleum jelly).