Copyright © All Rights Reserved. P-MU-ML301-SW Published: 2020.04.29
3-1
ML-300-SW
Operating Voltage» 12~24VDC/AC
Voltage Tolerance» ±10%
Current Draw» 250mA/12VDC; 150mA/24VDC
Version Changeable» Fail-safe or Fail-secure
Operating Temperature» 14°F to 120°F (-10°C~+49°C)
Humidity» 0~85% non-condensing
Lock bolt sensor switch output (For ML-300-SW):
SPDT rated 3A/125VAC
Solenoid testing» Tested to 1,000,000
!
cycles
Net Weight» 815g
Just applicable to vertical installation
Electric Lock
Installation Instruction
Specification
Double Swing Doors
Double swing door
Outswing
Inswing
Version Changeable:
Take out the Screw 1 , release screw 2 , move the
position and then tighten both screws.
“Fail-Safe”
(Power to Lock)
“Fail-Secure”
(Power to Open)
Caution:
Fixing Lug
NIB
Lock bolt
Strike Plate
For double swing door For single swing door
Euro profile
key cylinder
Stud bolt Position
Packing Contents
Do not completely remove screw 2 (as marked in the figure)
as the interior solenoid might fall off.
For fail-safe mode
For fail-secure mode
