Operator’s Manual
Turbo 1 -2 - 4
Page .
©GF Gianni Ferrari 10-2001
18
If coolant temperature is > 100° or the max. temperature acoustic buzzer sounds, immediately stop working, let the
engine run at low speed for a few seconds before turning it off and immediately clean the net and the
radiator itself.
Cleaning the hydraulic oil radiator guard
To protect it against clogging by grass, scraps and other debris, the
hydraulic oil radiator is protected by an easily removable mesh guard.
The protective net should be thoroughly cleaned at regular intervals
with compressed air. These intervals should be more frequent in the
case of heavy duty conditions.
If the oil max. temperature warning light is on (chapt. 8 – side control
panel) and/or the acoustic buzzer sounds, immediately stop working,
clean the net and check correct operation of the electric fan. Contact
the Service Dept. if the problem still exists.
Cleaning the air precleaner
Air filter is protected by a precleaner located above the battery.
The precleaner shall be cleaned at least once a day: unscrew the
fixing screw placed on the cover, remove the plastic container and
clear it out.
Greasing
Parts requiring periodical greasing have been kept to a minimum and ample use has been made of hermetic bearings or
sealed boxes with mechanism in oil baths.
The machine lubricators, which require maintenance every 50 hours approx., are located in the following points:
a)
Lifting pin bushing (No. 2)
b)
PTO control lever (No. 1)
c)
PTO idler support (No. 1)
d)
Pedals (No. 3 under the platform)
e)
Differential lock lever support (No. 1under the footrest)
It is also advisable periodically to lightly grease the telescopic splined part of the universal coupling of the mower deck.