06
1. Make sure unit is powered off before
charging it.
2. Connect the charger into the charging
stand. Then plug the charger into the
socket (Fig 3).
3. When the unit is charging, the LED
indicator will flicker once every 2
seconds, when fully charged, the LED
indicator will have a solid light. If there is
fault on charge circuit, the LED indicator
will flicker twice every second (Fig 4).
4. When unit is fully charged, the electric
circuit control will stop charging
automatically to protect the battery.
5. It is normal that the charger becomes a
little hot when in use
6. After every use, please charge the
vacuum to ensure it has sufficient
power. We recommend not leaving the
vacuum charging if it is not going to be
used for a long period of time.
1. Remove the unit from the charging
stand.
2. Pull the handle into position (Fig 5).
3. Press the on/off button to switch on your
vacuum (Fig 6).
Charging Your Vacuum Cleaner
THE ORIGINAL CHARGER FOR THE UNIT MUST BE USED
MAKE SURE THE POWER VOLTAGE IS THE SAME AS THE VOLTAGE
LISTED ON THE RATING LABEL
3
4
5
6
Using Your Upright Vacuum Cleaner
ON/OFF