04
Instructions for Use
Hair Dryer (AT1413)
1. There is a changeable voltage switch of either 110v or 230v. Check
if the voltage indicated on the appliance corresponds to the local
mains voltage before you connect the appliance.
2. Before switching on check that the voltage
setting on your hair dryer is set to the
correct country mains voltage for use.
THIS PRODUCT MUST ONLY BE USED WITH
THE CORRECT VOLTAGE SETTING
3. NEVER SET THE VOLTAGE SWITCH TO 110V
AND USE THE HAIRDRYER IN A 230V MAINS
COUNTRY. THIS CAN CAUSE THE UNIT TO
OVERHEAT AND IS VERY DANGEROUS
4. Always ensure the powersetting switch is
set to the OFF position before plugging the
unit into a power outlet.
5. Use the high setting for drying hair, and use
low setting for styling.
6. Should the hair dryer stop for any reason,
turn it off at once and allow to cool.
7.
Adjust the desired blowing strength:
Position 0: OFF
Position 1: LOW - (Half power, medium
temperature for gentle drying and styling)
Position 2: HIGH - (Full power, high
temperature for quick drying)
8.
In order to avoid a hazard, after use switch off and remove the
mains plug. Ensure the hair dryer has cooled completely before
packing away. The handle can be folded for convienient storage.
