background image

A. INSTRUCTION

The GIANDEL Power inverter product line is used for back-up power. The pure sine 

product line is ideal for sensitive equipment and provides clean power, which is more 
efficient for back-up power applications. It converts DC (direct current/car battery) 
power into AC (alternating current) power that can be used for running a wide variety 
of tools and appliances under rating power. This inverter is perfect for providing 
mobile power in cars, boats and work trucks. The inverter can also be utilized as a 
back-up source of electricity in the event of an electrical failure or for several off-grid 
applications such as camping or in your RV.

B. Please read this instruction manual carefully and make sure your inverter is 

installed properly before using.

C. Warning and safety

1) Read the manual before connecting this inverter and keep it for future reference.
2) Don't put the inverter under sunlight, near a heating source, wet or humid 

environment. 

3) The case housing of inverter will be hot while using. Do not allow flammable 

materials to contact the inverter, such as clothing, sleeping bags, carpet or any 
other flammable materials. The heat from the inverter can damage these items.

4) The power inverter is designed to be used with a negative ground electrical system! 

Don't use with positive ground electrical systems (the majority of modern 
automobiles, RVs, trucks and boats are negative ground).

5) Do not disassemble the unit: it may cause fire or electric shock.
6) This device should only be serviced by a qualified technician. This item does not 

have any serviceable parts.

7) Prevent body contact with grounded surfaces such as pipes, radiators, ranges, and 

refrigerator enclosures during installation.

8) Do not operate the inverter if under the influence of alcohol or drugs. Read warning 

labels on prescriptions to determine if your judgement or reflexes are impaired 
while taking drugs. If there is any doubt, do not operate the inverter.

9) People with pacemakers should consult their physician(s) before using this 

product. Electromagnetic fields in close proximity to a pacemaker could cause 
interference to or failure of the pacemaker.

10) Keep the inverter well-ventilated. Do not place any objects on top of or next to the 

inverter or allow anything to cover the cooling fans; doing so can cause the 
inverter to overheat, causing a potential fire hazard and/or damage to the inverter. 
Leave adequate ventilation space underneath the inverter as well; thick carpets 
or rugs can obstruct air flow, causing the inverter to overheat.

11) Avoid unintentional starting. Be sure the switch is in the OFF position when not in 

use and before plugging in any appliance.

12) Keep inverter away from children. Don't install the inverter where it is accessible to 

children.

13) The power inverter will output the same AC power as utility power, please treat the 

AC outlets as carefully as you would your home AC outlets. Do not put anything 
other than an electrical appliance into the output terminal.  It may cause shock or 
fire.

14) Disconnect the battery and inverter when not in use.

1.

2.

DC Input Voltage

Output Wave Form

Output Power

Output Voltage

Surge Power 

Over Load power

Efficiency

No Load Current

Battery Low Alarm

Battery Low Shutdown

Input Over Voltage Shutdown

Operating Temperature

Over Temperature Protection

Intelligent Cooling Fan

USB Output

Internal DC Input Fuse

Power Switch

Cigarette Lighter Cable

Dimensions (LxWxH)

Net Weight

  PS-300B

D. Features

Model

(Automatic Recovery/Shutdown)

1)Adopt advanced MPU control.

DC 9.5 

±

 0.5V

(Automatic Recovery at 12.5VDC)

DC16

±

0.5 V

(Automatic Recovery at 14VDC)

5 VDC, Max 4.8A(Dual 2.4A)

Automatic identification charging IC

12V (9.5-16V)

Pure Sine Wave(THD≤3%)

300W

AC110-120V 60Hz

600W for 40 milsec

400W

±

100W

about 90%

0.35A

DC 9.8 

±

 0.3V

32-113° F

149° F 

±

 41° F

Must Be Fitted, Use 30A Maximum

ON/OFF Control

YES

6.9” x 4.3” x 1.9”

1.65 lb

The cooling fan on the product will not run when
start up the inverter, it will start running only when 
temperature reach 104° F

±

 41° F or load over 100W

Note: 

Performance of this unit may vary depending on the available battery power or 

appliance wattage.

Warning: 

The  warnings,  cautions,  and  instructions  discussed  in  this  instruction 

manual cannot cover all possible conditions and situations that may occur. It must be 
understood by the operator that common sense and caution are factors which cannot 
be  built  into  this  product,  but  must  be  supplied  by  operator.  Guard  against  electric 
shock. Do not open the metal case; risk of electric shock.

Reviews: