AC output socket
4. ASSEMBLE
1) The position of Mounting
First ensure that there is enough space to install the inverter, while the installation
location must meet the following requirements:
(1) Drying: Do not use water or other liquids dripping on the inverter
(2) Cool: a working environment temperature of the product is 0-40
℃
, preferably a
temperature of 10-25
℃
, at a temperature as low as possible within this range
(3) Ventilation: There should be a certain distance between inverter and other objects, to
avoid blocking the products vents.
3) Assemble the remote control box
Power ON/OFF switch
3.
(4) Clean: Do install the products in the dusty, wood chips or other particles , If cooling fan
is turned on, the particles involved in the inside of the product, thus affecting the
normal work.
(5) Inverters and batteries when connected, will produce arcs or sparks, so there should
not be around flammable objects such as gasoline, alcohol , etc.
2) Assemble the inverter
For this big power inverter, because the heavier weight, preferably mounted on a solid
platform, such as floor, table or mounting bracket fine. In order to avoid falling off, platform
for supporting the product should can bear the weight of sufficient capacity, and it is good
with four screws to secure the product.
2)Front panel:
54mm
66mm
52.5mm
41mm
