6.
Output socket
AC output voltage
Single socket
max output current
Single socket
max output power
110~120VAC
220~240VAC
220~240VAC
220~240VAC
15A
16A
13A
10A
1500W
3000W
2500W
2000W
220~240VAC
13A
2500W
7.
2. In high current, the input DC wire may produce voltage drop, therefore, the operating
voltage should be subject to the value on the terminals. If the voltage drop is too large,
it can increase the acreage of the section or reduce the length of the lead.
3.Connect cathode wire of the battery to the cathode terminal (black) on the back panel of
inverter and then connect the anode wire of the battery to the anode terminal (red) on
the inverter, and fix them.
Warnings:
Please wear eye patch and work clothes when working around the battery to avoid the
acid and corrosive objects harm your eyes and skin.
Prepare enough water and soap. In case the acid materials contact eyes or skin, clean
it by soap and water as soon as possible. If the acid materials spay to your eyes
accidentally, clean it by cold water immediately and then sent to hospital.
Do not put any combustible material in the location of installation for spark will result
when it is connected to the battery.
Keep good ventilation. The battery may produce a little inflammable gas when it works,
so keep away from the inverter and it is better to install them in different space.
Fix the connecting wire of the input DC, or it will result the over-reduction of the
voltage or over-temperature of the wire.
Reverse connection of the polarities or the short circuit will burn the fuse or result the
permanence damage of the internal elements of inverter.
Take away the metal accouterment, such as ring or watch, when installation to avoid
the short circuit.
Although there is over-voltage protection, it may also cause damage of the inverter if
the input voltage is too high.
3).Connection of the AC appliance Put the power plug of the AC appliance load into the
output AC receptacle of the inverter directly.
Warnings:
1. Make sure that the switches of the inverter and appliance power are in OFF position
before connection.
2. Check the power cord. If it is damaged, it should be connected after replacement.
3. Each outlet of the inverter has a given current rating of the manufacturer. It shall not
exceed this value during use. Otherwise, the socket may be damaged by overheating
and may cause an electric shock. The maximum output power of a single socket is
shown in the following table:
8 . USAGE OF INVERTER
How to use a inverter
1) Check the output voltage and capacity of the battery to make sure it applicable to the
requirement of the product use.
2) Connect the battery and the DC cable of the inverter to ensure that the polarities do not
be reversed and in good contact.
3) Long press the switch of inverter or of remoter for over 0.5s and later on let it go, if the
indicator lighter on the inverter or on the remoter box is on, it means that the inverter
start to work normally. This method can avoid effectively turning on the unit due to the
interference or any mistakes.
4) Switch off electrical appliances and put electrical appliance plug to the AC output
socket of inverter. And then switch on electrical appliance for using.
5) The cooling fans inside the inverter do not work when the unit power on. It doesn't run
until the case temperature rise up to 40
.
6) Switch off inverter and remoter to stop working. At that time, the indicator lights in both
inverter and remoter are off. The inverter does not consume current from battery when
it switched off
How to use USB outlet
The inverter provides two USB which offer stable 5V DC voltage; the maximum current
is 2.4A each, which can directly provide power for the portable device with USB port.
Notice:
Before use the USB power supply, please make sure the device can be
charged by USB and the maximum working current is no more than 2.4A
9. SOFT START TECHNOLOGY
The soft start technology built into this inverter protects the unit from delivering too
much AC power at once by gradually increasing the AC voltage pushed out. To make
sure that you are utilizing this feature, turn on the appliance being used before turning
on the inverter. This is especially necessary for equipment that has an inductive load or
electrical motor.
Power Inverter With
Remote Controller