Query and Set the Address
（
1
）
Enter to set
①
Press the Address key on the remote control for 5 seconds to enter the interface of
address;
②
Display the addresses and symbols last time # @
（
2
）
The instructions of set the address
①
Press the Mode button to enter the set code sending state, at the same time address
flashing display; then press the
▼/
▲
key to set the address
②
Press the mode button to stop flashing display, at this time into the set address
sending state, can’t send address when flashes
③
Press the on / off key to enter the sending state and send the address set code
④
If not in the address sending state, press the on / off key, do not send the set code
（
3
）
The instructions of query the address
①
Press the Fan speed key to enter the query code sending state, display # and @
symbol at this time
②
Press the on / off key to send query codes
③
If not in sending state, press the on / off key, do not send the query code
（
4
）
To exit setting
①
Long press Address key for five seconds, you can exit setting
②
Exit the menu when there is no related address set press for more than 30 minutes
