6
Press this button to set up &down swing
angle, which circularly changes as below:
OFF
This remote controller is universal . If any command , or is sent out, the unit will carry
indicates the guide louver swings as:
Press this button to turn on I FEEL function. The unit automatically adjust temperature according to
the sensed temperature. Press this button again to cancel I FEEL function.
I FEEL:
SWING:
7
Remote Controller Description
ON/OFF :
MODE :
+
:
AUTO
COOL
DRY
FAN
HEAT
*
*Note:Only for models with heating function.
After energization, AUTO mode is defaulted. In AUTO mode, the set temperature will not be displayed
on the LED of the indoor, and the unit will automatically select the suitable operation mode in
accordance with the room temperature to make indoor room comfortable.
This button is used for setting Fan Speed in the sequence that goes from AUTO,
,
FAN
:
1
4
3
2
5
Press this button to turn on the unit .Press this button again to turn off the unit.
Press this button to decrease set temperature. Holding it down above 2 seconds rapidly decreases
set temperature. In AUTO mode, set temperature is not adjustable.
Press this button to increase set temperature.Holding it down above 2 seconds rapidly increases set
Auto
Medium speed
Low-Medium speed
Low speed
High speed
Medium-High speed
Each time you press this button,a mode is selected in a sequence that goes from AUTO, COOL,DRY,
*
, as the following:
to
then back to Auto.
,
,
,
How to use the remote control to operate the unit
OPERATION INSTRUCTIONS
temperature. In AUTO mode, set temperature is not adjustable.
FAN,and HEAT
out the command as
Note:
will flash once.Air conditioner will give out a sound,which indicates the signal has been sent to air conditioner.
is ON (red indicator). You can operate the air conditioner through the remote controller.
Ɣ
After putting through power, air conditioner will give out a sound and operation indicator
"
"
Ɣ
At ON status, after each pressing button on remote controller, the signal icon " " on remote controller
Ɣ7KLVLVDJHQHUDOXVHUHPRWHFRQWUROOHULWFRXOGEHXVHGIRUWKHDLUFRQGLWLRQHUVZLWKPXOWLIXQFWLRQ
For some function, which the model doesn't have, if press he corresponding button on the remote
the corresponding button on the remote controller that the unit will keep the original running status.
