background image

Your Guitar Silencer

 pedal has been tested and complies with the following 

Standards and Directives as set forth by the European Union:

Council Directive(s):

 

89/336/EEC Electromagnetic 

Compatibility

Standard(s):

 

EN55013, EN50082-1

This means that this product has been designed to meet stringent guidelines on 

how much RF energy it can emit, and that it should be immune from other sources 

of interference when properly used. Improper use of this equipment could result 

in increased RF emissions, which may or may not interfere with other electronic 

products.

To insure against this possibility, always use good shielded cables for all audio input 

and output connections. This will help insure compliance with the Directive(s).

For more information about other Rocktron products, please see your local dealer 

or one of our importers closest to you (listed on the Rocktron website

(www.rocktron.com).

Read all instructions contained in this manual.

Keep these instructions

Heed all warnings

Follow all instructions.

Do not use this apparatus near water.

Clean with dry cloth

Copyright © 2009 GHS Corporation 

All Rights Reserved.

Compliance

Summary of Contents for Rocktron Guitar Silencer













Reviews: