TT30 SERIES HEATER ASSEMBLY
The tank collar bracket must be assembled before the heaters can be attached to the propane tank.
1. Align bolt holes in tank collar bracket and piezo bracket with bolt holes in center plate on manifold.
2. Drive-in two machine screws (supplied) into the bolt holes attaching tank collar bracket to center plate
on manifold. (Fig. 1)
Tools Required:
phillips head screwdriver
FIGURE 1
Tip over Switch
Manifold
Tank Collar Bracket
electrode
Machine Screw
heat regulator knob
handwheel
piezo
(noTe: some models only)
electrode Cable
Mounting Bolt knob
DUAL BURNER MODEL
5
PROPANE TANK TOP HEATER
Estimated Assembly Time:
5 minutes
Contents:
Tank Top Heater (1)
Tank Collar Bracket (1)
M4x12 Machine Screws (2)
Summary of Contents for TT15CDGP
Page 2: ......
