GHP Group GWS-2200, Manual

Page: 6 / 142

GHP Group, Inc.
Model: Large Wood Stove
Report Number:0418WS018E
INDIVIDUAL RUN SUMMARIES
Run 1 - Test procedures followed to produce a high burn rate with a primary air setting of
fully open. Observed burn rate was calculated at 5.18 kg/hr. Emissions results
were calculated using particulate sampling from kindling, start-up fuel, and test
fuel load combined (cold to hot). Burn rate, and efficiency were calculated using
data from the test fuel load only (hot to hot). No sampling anomalies occurred;
this test run was determined to be valid for inclusion in the weighted average.
Run 2 - Test procedures were followed to produce a medium burn rate with a primary air
setting of 0.03” from full closed. Observed burn rate was calculated at 1.18 kg/hr.
Emissions and efficiency results were calculated using a hot to hot burn cycle, a
coal bed generated by the high burn procedure was used. No sampling anomalies
occurred; this test run was determined to be valid for inclusion in the weighted
average.
Run 3 - Test procedures followed to produce a high burn rate with a primary air setting of
fully open. Observed burn rate was calculated at 4.84 kg/hr. Burn rate, was
calculated using data from the kindling, start-up fuel, and test fuel (cold to hot).
No sampling occurred during this test; it was conducted to generate a coal bed for
test number 4.
Run 4 - Test procedures were followed to produce a low burn rate with a primary air
setting of fully closed. Observed burn rate was calculated at 1.17 kg/hr.
Emissions and efficiency results were calculated using a hot to hot burn cycle, a
coal bed generated by the high burn conducted in test three was used. No
sampling anomalies occurred; this test run was determined to be valid for
inclusion in the weighted average.
6 of 142