Center Frame
The top can be identified
by the flat top that travels
the length of the frame.
Twin and Twin Long
foundations do not use
center frames.
Please Note:
· The Foundation is to be assembled on a hard flat surface
· It is recommended that two people are available for assembly
· Wood is a natural product. If there are visual discolorations, knots
·
or even minor cracks this will not adversely affect the foundation
·
use or durability.
Phillips screw driver is required for assembly
Continue with step 2 on the other side of this sheet.
60 - Wood Screws for Slats and Top &
Bottom Rails (includes 4 extra screws)
Supplied Hardware
Please visit WWW.GhostBed.com for product
information and video instructions.
>Limited 3 year warranty visit
WWW.GhostBed.com to view
and register warranty
>Compliant with CPSC FR1633
· Be aware of rough or sharp edges, use care during assembly
· Please follow steps in order for best results
Fabric Cover
Screws
Left Side Frame
The top can be identified by the 1
inch wide rib.
The outside can be identified by
the rounded corner.
The top can be identified by the 1
inch wide rib.
The outside can be identified by
the rounded corner.
Top Slat Bundle (2 sets)
Each set contains 1 top cross
rail and 6 top slats. The top
cross rail and slats are evenly
spaced and connected with
fabric strips.
Bottom Cross Rails
Right Side Frame
1.
Identify components.
GhostBed • 7143 West Broward Blvd
Plantation, FL 33317 • 855-855-4499
Knock Down Mattress Foundation (Boxspring)
Assembly Instructions
(KD-Foundation®)
Made in USA
