Ghost batly, Instruction Manual

Page: 18 / 24

Page 18
CCXX - Selection of JUMP mode (the colors are linked one after the other)
Press the
MENU
key until
CCXX
is displayed. Press
ENTER
.
The display shows “
CC01” to “CC99
”. Select the desired speed with the
UP & DOWN
keys. Press
ENTER
to
validate the selection.
“CC01” (slowest) and “CC99” (fastest).
EEXX - Selection of Pulse mode
Press the
MENU
key until
EEXX
is displayed. Press
ENTER
.
The display shows “
EE01” to “EE99
”. Select the desired speed with the
UP & DOWN
keys. Press
ENTER
to
validate the selection.
“EE01” (slowest) and “EE99” (fastest).
FFXX - Selection of Fade mode (the colors follow each other when fading)
Press the
MENU
button until
FFXX
is displayed. Press
ENTER
.
The display shows “
FF01
” until “
FF99
”. Select the desired speed with the
UP & DOWN
keys. Press
ENTER
to
validate the selection.
“FF01” (slowest) and “FF99” (fastest).
StXX - Strobe mode selection
Press the
MENU
key until
StXX
is displayed. Press
ENTER
.
The display will show “
St01” to “ST15
”. Select the color of the Strobe with the
UP & DOWN
keys. Press
EN-
TER
to validate the selection. The display indicates
SP01 to SP99
. Select the desired speed with the
UP & DOWN
keys. Press
ENTER
to validate the selection.
“SP01” (slowest) and “SP99” (fastest).
Manu - Manual Mode
Press the
MENU
key until
MANU
is displayed. Press
ENTER
.
Color-by-color intensity adjustment:
R = Red - G = Green - B = Blue - W = White
.
Press the
MENU
key until
RXXX
(or
GXXX
-
BXXX
-
WXXX
) is displayed.
Press
ENTER
. Select the color intensity with the
UP & DOWN
keys. Press
ENTER
to validate the value.
Note: During an extinction / re-ignition cycle the projector retains its last state.
Ircl - Activation of the IR remote control
Press the MENU button until IRCL is displayed. Press ENTER .
The display shows “ON” or “OFF” .
Select ON , with the UP & DOWN keys. Press ENTER to validate, the projector will react to the information
transmitted via the IR remote control.
Select OFF with the UP & DOWN keys. Press ENTER to validate, to deactivate the remote control.
LED - Adjustment of the display backlighting
Press the MENU button until LED is displayed. Press ENTER .
The display shows “ON” or “OFF” .
Select ON , with the UP & DOWN keys. Press ENTER to validate, the display remains on constantly.
Select OFF with the UP & DOWN keys. Press ENTER to validate, the display goes off after 30 seconds.