GHM Martens TB225, Operating Manual

Page: 4 / 36

GHM Group
– Martens
GHM Messtechnik GmbH | Kiebitzhörn 18 | 22885 Barsbüttel | Germany
Phone +49-40-670 73-0 |
info@ghm-group.de
| www.ghm-group.de
4
1.2 Safety instructions
Read the product description before commissioning the device. Ensure that there
are no limitations for use of the product for the relevant applications.
The owner is responsible for ensuring the fault-free operation of the
device. The owner is obligated to ensure compliance and to observe
the required work and safety measures of the current applicable regu-
lations for the entire duration of use.
1.3 Product liability and warranty
Exclusion of liability:
The contents of the operating manual have been checked to ensure conformity
with the described device. However, deviations cannot be entirely ruled out.
Therefore, we cannot assume any guarantee for complete conformity. The speci-
fications in this document are checked regularly and any necessary corrections
are incorporated into subsequent versions. This document is subject to technical
changes. In addition, all claims are based on the valid 'Standard Terms for the
Supply of Products and Services of the Electrical Industry'.
GHM Messtechnik GmbH cannot inspect or repair any devices without
the required form having been filled in completely (refer to page 32
'Returns').
1.4 Standards and directives
Conformity with Directive 2014/30/EU
CE Conformity
EN 60730-1: 2011
EN 60730-2-9: 2010
Installation Category 3 for equipment of Overvoltage Category III according to
IEC 61000-4-5.
1.5 Approvals
EN 14597: 2012
Temperature control devices and temperature limiters for
heat generating systems
EN 61508:2010 Functional safety of electrical/electronic/programmable
electronic safety-related system
GEFAHR