H56.0.02.6C-01
Operating Manual GTH 1150
Page 3 von 10
_____________________________________________________
_____________________________________________________________________________
1 Safety
1.1 General note
Read through this document attentively and make yourself familiar to the operation of the device before you
use it. Keep this document in a ready-to-hand way in order to be able to look up in the case of doubt.
Mounting, start-up, operating, maintenance and removing from operation must be done by qualified,
specially trained staff that have carefully read and understood this manual before starting any work.
The manufacturer will assume no liability or warranty in case of usage for other purpose than the intended
one, ignoring this manual, operating by unqualified staff as well as unauthorized modifications to the device.
The manufacturer is not liable for misprints.
1.2 Intended Use
The device is designed for temperature measurements in various media in seconds.
The measuring range is -50... +1150 °C.
The device has a 2-pole standard flat-plug connection suitable for all type K thermocouple probes. Refer to
chapter 6 Type K-sensor to view a selection of the available probes.
The safety requirements (see below) have to be observed.
The device must be used only according to its intended purpose and under suitable conditions.
Use the device carefully and according to its technical data (do not throw it, str
ike it …)
Protect the device from dirt.
1.3 Qualified staff
All instructions have to be well understood and complied with.
To be sure that there´s no risk arising due to misinterpretation of measured values, the operator must have
further knowledge in case of doubt - the user is liable for any harm/damage resulting from misinterpretation
due to insufficient knowledge.
1.4 Safety signs and symbols
Warnings are labeled in this document with the followings signs:
Caution!
This symbol warns of imminent danger, death, serious injuries and significant
damage to property at non-observance
.
Attention!
This symbol warns of possible dangers or dangerous situations which can
provoke damage to the device or environment at non-observance.
Note!
This symbol point out processes which can indirectly influence operation, possibly
cause incorrect measurement or provoke unforeseen reactions at non-observance.
