H68.0.03.6C-01
Operating Manual GMK 100
page 4 of 12
_____________________________________________________
_____________________________________________________________________________
2.3 Reasonably foreseeable misuse
This device must not be used at potentially explosive areas!
The device must not be used at a patient for diagnosis or any other medical purpose!
Do not use these products as safety or emergency stop devices or in any other
application where failure of the product could result in personal injury or material
damage.
Any failure to comply with these instructions could result in death, serious injury and material
damage.
The measuring principle implies that both water and metal are influencing the display value.
Eventually existing metal structures may have negative effect to the measuring, please consider the
Measurement Basics (chapter 6).
2.4 Safety guidelines
This device has been designed and tested in accordance with the safety regulations for electronic
devices. However, its trouble-free operation and reliability cannot be guaranteed unless the
standard safety measures and special safety advises given in this manual will be adhered to when
using the device.
1. Trouble-free operation and reliability of the device can only be guaranteed if the device is not
subjected to any other climatic conditions than those stated under "Specification".
If the device is transported from a cold to a warm environment condensation may cause in a
failure of the function. In such a case make sure the device temperature has adjusted to the
ambient temperature before trying a new start-up.
2.
If there is a risk whatsoever involved in running it, the device has to be switched off
immediately and to be marked accordingly to avoid re-starting.
Operator safety may be a risk if:
- there is visible damage to the device
- the device is not working as specified
- the device has been stored under unsuitable conditions for a longer time.
In case of doubt, please return device to manufacturer for repair or maintenance.
3
Product Description
3.1 Scope of supply
The scope of supply includes:
GMI 15 plus
9V - battery
Operating manual
Test protocol
3.2 Operation and maintenance advice
Battery powered supply
If ‘bAt’ is shown in the lower display the battery has been used up and needs to be replaced.
However, the device will operate correctly for a certain time.
The battery has to be taken out, when storing device above 50°C.
We recommend taking out battery if device is not used for a longer period of time.
