LPPYRA03
- 24 -
V2.8
11
ACCESSORIES ORDERING CODES
LPSP2
Shade disk.
LPS2
Kit including a fixing base for the pyranometer and a
∅
16 x
500 mm rod.
LPS3
Fixing bracket for the pyranometer, suitable for
∅
40 ÷ 50 mm
mast. Installation on horizontal or vertical mast.
LPRING04
Adjustable holder for mounting the pyranometer in an inclined
position on Ø 40 mm mast with internal thread.
HD2003.77/40
Clamping for mast
∅
40 mm to install the pyranometer on a
transverse mast.
LPS6
Kit for the installation of the pyranometer, including: 750 mm
mast, base fitting, graduated support plate, bracket for pyranom-
eters.
CPM12AA4…
Cable with 4-pole M12 connector on one end, open wires on the
other end. Length 2 m (CPM12AA4.2), 5 m (CPM12AA4.5) or 10 m
(CPM12AA4.10). For LPPYRA03, LPPYRA03AC and LPPYRA03AV.
CPM12-8D…
Cable with 8-pole M12 connector on one end, open wires on the
other end. Length 2 m (CPM12-8D.2), 5 m (CPM12-8D.5) or 10 m
(CPM12-8D.10). For LPPYRA03S and LPPYRA03S12.
CPM12-8DA…
Cable with 8-pole M12 connector on one end, open wires on the
other end. Length 2 m (CPM12-8DA.2), 5 m (CPM12-8DA.5) or
10 m (CPM12-8DA.10). For LPPYRA03ACS.
CP24
PC connecting cable for the RS485 MODBUS parameters configu-
ration of the LPPYRA…S pyranometers. With built-in RS485/USB
converter. 8-pole M12 connector on instrument side and A-type
USB connector on PC side.
LPRING13
Ring base for measuring the diffused radiation.
DELTA OHM metrology laboratories LAT N° 124 are ISO/IEC 17025 accredited by
ACCREDIA for Temperature, Humidity, Pressure, Photometry / Radiometry, Acous-
tics and Air Velocity. They can supply calibration certificates for the accredited
quantities.
