HVAC40…
- 3 -
V1.1
1
INTRODUCTION
HVAC40… series transmitters and hygrostats measure temperature, relative humidity
and dew point using an interchangeable relative humidity and temperature digital
sensor.
A stainless steel 10 µm filter protects the sensor against dust and particles (other fil-
ters are available for different applications).
The probe is available in three different versions:
•
fixed vertical probe for wall mounting (HVAC40...TV);
•
fixed probe with 2 m cable (HVAC40...TC.2);
•
fixed duct horizontal probe (HVAC40...TO).
Available outputs, depending on the model:
•
RS485 Modbus–RTU digital output (HVAC40S17…);
•
0...10 V voltage analog output (HVAC40V17…);
•
0...20 mA / 4...20 mA active current analog output (HVAC4017…);
•
2-wire (current loop) 4...20 mA analog output (HVAC40A17…);
•
ON/OFF relay switch (HVAC40R17…).
Versions with 4-digit LCD display (option L) are available, which allow the measured
parameters to be displayed.
In the versions with LCD, two LED indicators indicate the presence of the power sup-
ply and of an eventual alarm condition: exceeding of the set measurements thresh-
olds, in the versions with relay switch output; measurement detected outside the
measuring range, in the versions with analog or digital output.
The instruments are factory calibrated and ready for use.
The configuration can be made by connecting the serial port of the instrument to the
PC or by means of the quick configuration dip switches on the circuit board. The ver-
sions with relay switch output are equipped with two internal buttons for the configura-
tion via display.
Summary of Contents for Delta OHM HVAC40 Series
Page 6: ...HVAC40 6 V1 1 HVAC40 17TO HVAC40 17TV ...
Page 23: ......
