HD2013
- 8 -
V1.6
SW1 switch down, towards the EXTERNAL indication (see the figures
3.
2 and
3.
3): the
analog or SDI-12 output is disabled.
Fig. 3.1 – Connections of contact output and heating
Connection of analog output (only HD2013…A… and HD2013…V…):
Perform the connections as shown in figure 3.
2. Set the SW1 switch up, towards the
INTERNAL indication (the contact output is disabled).
Fig. 3.2 – Connections of analog output
Connector of the
cone heater
RESET line
GND
Analog output positive
Power supply positive
SW1 switch
Summary of Contents for Delta OHM HD2013
Page 13: ...HD2013 13 V1 6 Fig 3 8 Ground installation...
Page 14: ...HD2013 14 V1 6 Fig 3 9 Installation raised above ground...
Page 31: ......
