HD2013.3
- 19 -
V1.2
7
SAFETY INSTRUCTIONS
General safety instructions
The instrument has been manufactured and tested in accordance with the safety
standard EN61010-1:2010 “Safety requirements for electrical equipment for meas-
urement, control and laboratory use” and has left the factory in perfect safety techni-
cal conditions.
The instrument proper operation and operating safety can be ensured only if all stan-
dard safety measures as well as the specific measures described in this manual are
followed.
The instrument proper operation and operating safety can be ensured only in the cli-
matic conditions specified in this manual.
Do not use the instruments in places where there are:
•
Corrosive or flammable gases.
•
Direct vibrations or shocks to the instrument.
•
High-intensity electromagnetic fields, static electricity.
User obligations
The instrument operator shall follow the directives and regulations below that refer to
the treatment of dangerous materials:
•
EEC directives on workplace safety.
•
National law regulations on workplace safety.
•
Accident prevention regulations.
Summary of Contents for Delta OHM HD2013.3
Page 5: ...HD2013 3 5 V1 2 Fig 2 1 dimensions mm Bird spikes optional Bracket ...
Page 21: ...HD2013 3 21 V1 2 NOTES ...
Page 22: ...HD2013 3 22 V1 2 NOTES ...
Page 23: ......
