User manual
Touch
As of 01/12/2016
Page 11/11
3.2 Colors
If you don’t like to use the colors that are already predefined in the theme, you can use own colors.
3.3 Measurement value memory
ProfiLux Touch
stores up to 4 million measurement values in the integrated memory, the storing is made
independently from the measurement value storing in
ProfiLux
. You can set the measuring interval (period between
storing two measurement values) in the range from 60 s to 3600 s. Please be aware that the shorter the measuring
interval is selected, the longer the display of the measured values will take. If necessary you can also delete all
measured values stored up to now.
The measured values of all connected sensors are stored automatically, a selection of the sensors is not possible (the
selection of the sensors for the measurement value storing in
ProfiLux
has no influence on the storing in
ProfiLux
Touch
).
3.4 Display illumination
The brightness of the background illumination of the
ProfiLux Touch
display can be set. It is possible to reduce the
brightness at a certain time of day (e.g. at night). When pressing the Touch, the background illumination becomes
automatically brighter for a short time.
Like for all white LEDs the live time of the LED background illumination depends on the brightness, therefore you
should adjust the display illumination only as bright as necessary, at night the brightness should be reduced.
A moderate illumination saves energy – the display needs at full brightness approximately twice of energy compared
with darkness.
3.5 Beeper
You can set if the Beeper shall be activated when touching the Touch and/or in case of an alarm.
GHL Advanced Technology
GmbH & Co. KG
Marie-Curie-Str. 20
67661 Kaiserslautern
www.aquariumcomputer.com
