GHIDINI ADN 044, User And Maintenance Manual, Page: 7 / 13

7
WARNING: DURING OPERATION, DO NOT EVER:
Open the draining fawcet.
Leave the equipment operating unchecked, not even for a short period, otherwise turn it off.
10 - HAZARDOUS USE
The conformity verification, according to the essential safety rules and to the provisions of the machine directive,
has already been carried out by filling out the specially provided checking lists that are included in the technical file.
The checking lists are of two kinds:

List of dangers (drawn from EN 1050 referring to EN 292)

Application of the main safety features (Machine Directive
– appendix. 1, part 1)
The dangers described in the following have not been completely removed, but they have been deemed to
be acceptable:
During the maintenance operation there could be some steam jets at low pressure, (maintenance
operation must therefore be carried out by using suitable protection devices)
The user must provide for a protection against direct and indirect contacts.
11 - HANDLING AND TRANSPORT
Before its shipment, the machine is carefully packed in a carton box or in a wooden frame. During the shipment
and storing of the machine, pay particular attention to the upside indication on the packaging. Upon receipt, please
check that the packing is intact and store the machine in a dry place.
12 - MACHINE UNPACKING AND INSTALLATION
ATTENTION: The unit must be installed, opened and repaired by fully qualified technicians only.
If the unit has been damaged externally during transport, may have suffered internal damage to its
components. Check the integrity of the machine before installation.
UNPACKING:
Find the most suitable place where to put the machine, then remove the packaging. Make sure that the machine
has not been damaged during the transport and the storage.
The packaging material does not require any special precautions for its disposal, for it is not dangerous or polluting
at all. Please refer to the local regulations for its disposal.
INSTALLATION:
The machine does not need to be anchored to the floor, except for istallation on self-moving means, where it is
necessary to use the holes on the base for the right fixing.
For a correct use and operation, as well as for an easy maintenance, leave a free space around the
machine
Do not install the machine in dangerous and/or inflammable places and/or unsuitable places.
Do not install the equipment on a inclined pavement or on unstable supports interposed between the
machine and the floor, danger of overturning.
Do not step on and not to use the equipment and its work plans as a ladder to reach the high points, and
generally do not use it as a support tool. Risk of damage and injury.
When connecting the iron, cut the steam pipe in excess to the suitable working length. Do not leave the
excess pipe hanging or rolled up, as this could cause condensation leaks from the iron.
- SAFETY SHOES.
- VISOR FOR PROTECTION.
- PROTECTIVE GLOVES.