Ghibli AS40 KS Use And Maintenance Manual Download Page 6

   

ENGLISH   6   

   

   

6.

 

DESCRIPTION   OF   THE   VACUUM   

INTRODUCTION   

It   is   important   that   the   vacuum   isconducted   by   responsible   personswhich   maintain   a   correct   functioning,   
maintenance   and   repair   use.   If   functioning   problems   arise,   please   contact   the   dealer.   The   buyer   is   not   
authorized   to   modify   or   tamper   the   vacuum,   failing   which   the   invalidation   of   the   warrantyand   the   
exemption   from   every   liabilityon   possible   damages   to   things   or   persons   by   the   manufacturer.   

   

   

   

INTENDED   USE   AND   MISUSE   

The   vacuum   AS40   KS   has   been   designed   tovacuum   dust,   solid   bodies   of   various   sizes   and   processing   
residues   constituted   by   a   mix   of   dust.   It   is   prohibited   to   vacuum   materials   with   the   risk   of   explosions   or   
singularly   inert   materials   but   which,   once   vacuumed   and   mixed   in   the   collection   container,   could   cause   
dangerous   chemical   reactions.   It   is   absolutely   prohibited   to   use   the   vacuumin   explosive   atmospheres   or   
outside   the   standard   temperature,   pressure   or   humidity   values.   Uses   different   from   those   listed   above   are   
not   allowed.   Any   use   different   from   the   one   for   which   the   vacuum   has   been   built   represents   an   anomalous   
condition   which   couldharmthe   appliance   andconstitute   a   serious   hazard   for   the   user.   

   

!   ATTENTION,   DANGER   
The   manufacturer   cannot   be   considered   liable   for   possible   damages   caused   by   an   improper   or   incorrect   
use.    Any    other    userelieves    the    manufacturer    from    any    responsibility    for    damages    to    persons    and/or   
things   andvoids   any   warranty   condition.   

   

Important!      

   

Always   use   dedicated   filters   depending   on   the   type   of   dusts   ordebris   to   be   vacuumed.

   

   

NOISE   LEVEL   

   

   

Noise   measurements   have   been   perform   in   accordance   with   what   is   establishedby   the

MachineryDirective   

2006/42/EC

.   The   phonometric   tests   performed   on   these   specific   vacuum   models,   at   a   distance   of   1   meter   

andfrom   an   height   of   1,60   meters,   in   correspondence   with   the   mostnoisy   position,   with   respect   to   the   four   
sides   of   the   machines,   highlight   an   acoustic   pressure   (LpA)   not   higher   than:   

74   dB   (A)      

The   vibrationsto   thehand-­‐arm   systemtransmitted   by   the   machine   are   lower   than   2,5   m/s

2

.   

   

Important!   

Pursuant   to   the   Legislative   Decree81/08,   the   workers   exposed   to   sound   pressure   levels   higher   than   85   dB   
(A)   must   be   protected   by   specific   individual   protection   devices.   

For   this   reason,   it   is   necessary   to,   if   the   processingrequire   the   usein   those   conditions,   provide   workers   
with   endorsed   individual   acoustic   protectionsand   to   inform   themabout   the   risks   deriving   fromexposure   to   
noise.   

Summary of Contents for AS40 KS

















Reviews: