Ghibli & Wirbel FR 15 E 38, Use And Maintenance

Page: 19 / 28

www.ghibliwirbel.com
Professional Cleaning Machines Since 1968
ENGLISH - 13
TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
The machine does not start
when pressing the central
button.
Low battery (for BC version
only).
Plug disconnected (for E ver-
sion only).
Main fuse blown (for BC ver-
sion only).
Check that the battery is
charged.
Connect the plug.
Replace the GREEN 30A
main fuse.
The brush does not rotate. Brush unit outlet overcurrent
error or brush unit open cir-
cuit error.
Brush motor damaged.
Brush rotation enabling but-
ton not pressed.
See paragraph “Warning
signals while using the ma-
chine”.
Replace the ratiomotor.
Press the button.
Aspirator does not work. Suction unit outlet overcur-
rent error or suction unit
open circuit error .
Intake motor damaged.
Aspirator enabling button not
pressed.
See paragraph “Warning
signals while using the ma-
chine”.
Replace the turbine.
Press the button.
The machine does not dry
well, leaving traces of water
on the floor.
Aspirator off.
Aspiration tube blocked.
Squeegee rubbers not cor-
rectly set up.
Recovery tank full.
Squeegee rubber blades
worn.
Start up the aspirator.
Check and if necessary
clean the aspiration tube that
connects the squeegee to
the recovery tank.
Set up the squeegee rubbers
as indicated in paragraph
“Squeegee setting” .
Empty the recovery tank.
Replace or turn over the
squeegee rubber blades.
Manuale FRECCIA 15_49021800_1ed_06-2017_a.indd 13 15/06/17 11:43