Ghibli & Wirbel AS 5 EVO 807, Use And Maintenance

Page: 11 / 16

www.ghibliwirbel.com
Professional Cleaning Machines Since 1968
ENGLISH - 3
Checking and cleaning the polyester fil-
ter (if present)
- Release the levers (1 Fig. 1) and remove
the cover (2 Fig. 2) complete with motor.
- Remove the polyester (3 Fig. 2) filter
- Clean the filter (3 Fig. 17) from the in-
side out with a blast of air; the filter can
be washed (3 Fig. 17) in warm water and
must only be replaced once it is com-
pletely dry. If it is too dirty, replace it.
- Reassemble all the parts by following the
dismantling process steps in the reverse
order.
Checking the air outlet filter
- Unhook the flap (27 Fig. 18); press it
downwards “A”, and then open it “B”.
- Remove the filter sponge (28 Fig.19)
from the flap (27 Fig. 19) and clean it with
a blast of air .
The filter sponge can be washed in warm
water and must only be replaced once it
is completely dry. If it is too dirty, replace
it with a new one.
- Reassemble all the parts by following the
dismantling process steps in the reverse
order.
Cleaning the appliance body
- Clean the unit body with a cloth damp-
ened with water or a mild detergent;
DANGER:
Do not wash the appliance using jets of
water.
SPARE PARTS
Pack of 10 paper filter bags code 6595030
Filter Cartridge code 6595006
HEPA filter code 6595007
PROBLEM CAUSE SOLUTION
The vacuum cleaner does
not work.
Switch not pressed.
Plug not inserted.
No current.
Press the switch.
Insert the plug into the sock-
et.
Check the power line.
Suction is not satisfactory. Paper bag full.
Filter elements clogged.
Accessories or tubes
clogged.
Replace the dust bag.
Clean the filter elements.
Check and clean the flexible
hose and the suction nozzle.
Manuale AS 5 EVO - 807_8050827_3ed_01-2018.indd 3 19/01/18 12:14