26
water repeatedly and wipe dry using a soft cloth. The bleach must be rinsed
off completely: Otherwise the Corian®-surface can discolour.
6
Treat the spot using a non-abrasive sponge and a standard detergent for
removing limescale. Rinse with warm water repeatedly and wipe dry using a
soft cloth.
7
Treat the spot using a non-abrasive sponge and acetone-free nail polish
remover. Rinse with warm water repeatedly and wipe dry using a soft cloth.
8
Treat the spot using a non-abrasive sponge and a metal cleaner or a rust
remover. Rinse with warm water repeatedly and wipe dry using a soft cloth.
9
If you have not been able to remove the contamination, please contact the
Gharieni Service Department.
*
Always wipe the surface in circling motion.
NOTICE!
Never use any other cleansing method as described in the schedule
above; otherwise you can cause permanent damage to the Corian®-surface.
10.2 Seat
The upholstery is made of PU (polyurethane) or synthetic leather.
Clean the PU using a cloth provided with a small amount of alcohol.
Clean the synthetic leather using the special detergent for synthetic leather
(
optional available from Gharieni).
10.3 Trouble shooting
In case of any malfunction, please contact the Gharieni Service Department.
11. GUARANTEE PROVISIONS
The Gharieni Group GmbH supplies all new equipment subject to a 3-years
guarantee. Wearing parts (such as e.g. incandescent lamps, UV lamps, glass panels,
consumables etc.) are not covered by this guarantee. Damage or loss due to
unprofessional or improper use, non-compliance with the provisions of the
instructions for use and/or gross negligence is not covered by guarantee either. In
addition, the guarantee is invalidated if any stickers (such as e.g. the type plate,
instruction notices etc.) are removed or if appliances or parts of appliances are
opened without this being explicitly allowed in the operating instructions (e.g. for
cleaning).
