29
10.1 Adjustment of the working height
10.1.1 MLX iDome / MLX i
3
(Cube) Dome Static
❖
The horizontal work height is 55 cm
and
cannot
be adjusted.
10.1.2 MLX iDome / MLX i
3
(Cube) Dome Electric
❖
The working height is adjusted using the corresponding pair of arrow buttons
which are integrated into the frame of the MLX iDome / MLX i
3
(Cube) Dome
(lateral to the lying surface); s. fig. below.
❖
The horizontal working height is adjustable from 55 cm up to 85 cm.
A
W
ORKING HEIGHT
:
UP
B
W
ORKING HEIGHT
:
DOWN
For safety reasons, the two lifting columns for height adjustment of the
MLX iDome / MLX i
3
(Cube) Dome Electric only work if you hold
down an arrow button.
When you release it, the movement stops immediately.
The movement when opening the heat domes is excepted.
When lowering the bed, the drives stop approx. 10 cm before the
lowest position is reached. When pressing the arrow button again,
the bed moves to the lowest position.
❖
After each application, move the lying surface of the MLX iDome /
MLX i
3
(Cube) Dome
completely down
using the appropriate arrow
buttons (MLX iDome / MLX i
3
(Cube) Dome Electric
only
!); s. figure.
This ensures that the two lifting columns always operate properly and
synchronously.
