28
10. Adjustment of the MLE
❖
The electrical adjustments of the MLE are carried out using the manual control
panel (MCP).
❖
The pneumatic adjustments of the MLE (armrests / headrest) are carried out
using a gas pressure spring by means of a lever.
For safety reasons, the MLE moves only while pressing a button of the
MCP. When you stop pressing, all moving-operation will stop
immediately.
10.1 Manual control panel (MCP)
The MCP is a wired control. The electrically controllable functions are controlled via
the MCP. You can control each of the 3 actuators individually by simply pressing the
relevant buttons.